过滤棉芯

Material: Resin
Filter form: pleated filter
Application: water filtration
Scope of application: pure water treatment, electroplating, chemical industry, pharmaceutical
Brand: TROJAN
Specifications: 0.1, 0.22, 0.45, 1, 5, 10
1. Overview and Features
     Polypropylene pleated filter element is a depth filter element, which is usually used for preheating, clarifying filtration and terminal filtration of liquids. It has the following characteristics: ultra-fine polypropylene fiber membrane is used as the filter medium, low-pressure difference, high flux, good filtration accuracy, low economic cost, all polypropylene structure, end cover, shell and center rod are all made of polypropylene Material; sintered by hot-melt process, that is, PP and PP are melted and bonded without any binder; it has a wide range of chemical compatibility; it has a series of apertures and a variety of interface forms.
2. The main technical parameters
   Filtration precision: 0.1, 0.2, 0.45, 0.65, 0.85, 1, 3, 5, 10, 20μm
   Filter element length: 250mm(10”254mm), 500mm(20”508mm), 750mm(30”762mm), 1000mm(40”1016mm)
   Filter area 0.5M2(10”), 1.0M2(20”), 1.5M2(30”), 2.0M2(40”)
3. There are three types of filter sockets: flat pressure, plug-in, and snap-in.
     Particular specifications can be customized
4. Maximum pressure difference 0.4Mpa (25℃, positive direction)
   Maximum working temperature 60℃
   Steam sterilization at 121℃, 30min
5. use
   Electronics industry: pre-filtration of a reverse osmosis water system, pre-filtration of a deionized water system.
   Pharmaceutical industry: Filtration of pharmaceutical, biological and plasma products, filtration of compressed air and gases.
   Food and beverage industry: mineral water, beverage, fruit juice, alcohol filtration.
   Chemical industry: organic solvents, ink filtration.
   Petroleum industry: oil field water injection filtration.
   Others: electroplating liquid, metal cutting liquid, photoresist and filtration of magnetic media, etc.